Technická 2896/2, 616 69 Brno, Czech Republic
Phone +420 541 143 246, Fax +420 541 142 224, E-mail: heatlab@fme.vutbr.cz, www.heatlab.cz

MAUDER, T.; RAUDENSKÝ, M. A heuristic approach to the inverse heat conduction problem. In Proceedings of 19th International Conference on Soft Computing MENDEL 2013. 1. Brno. 2013. p. 173 - 178. ISBN 978-80-214-4755-4.

KOTRBÁČEK, P.; HORSKÝ, J.; KVAPIL, J.; SCHOERKHUBER, K. OPTIMIZATION OF WORKING ROLL COOLING IN HOT ROLLING. Milano, Italy, Associazione Italiana di metallurgia. 2013. p. 1 - 11. ISBN 9788885298958.

HRABOVSKÝ, J.; LOŠÁK, P.; HORSKÝ, J. Srovnání dvou optimalizačních metod při hledání materiálových parametrů pro protlačovací zkoušku. In Techsoft Engineering ANSYS 2013 Setkání uživatelů a konference. 1. Praha, ARCADEA. 2013. p. 55 - 62. ISBN 978-80-905040-2-8.

CHABIČOVSKÝ, M.; RAUDENSKÝ, M. Experimental investigation of spray cooling of horizontally and vertically oriented surfaces. In Conference proceedings of 22nd Conference on metallurgy and materials. 1. Ostrava, Tanger, s.r.o. 2013. p. 102 - 107. ISBN 978-80-87294-39-0.

MAUDER, T.; ŠTĚTINA, J.; MASARIK, M. On-line fuzzy regulator for continuous casting process. In METAL 2013 Conference proceedings. Ostrava, Tanger s.r.o. 2013. p. 33 - 38. ISBN 978-80-87294-39-0.

HRABOVSKÝ, J.; LOŠÁK, P.; HORSKÝ, J. Estimation of fracture toughness of the oxide scales. In Conference proceedings of 22nd Conference on metallurgy and materials.1. 2013. p. 34 - 39. ISBN 978-80-87294-39-0.

KOMÍNEK, J.; POHANKA, M.; ONDROUŠKOVÁ, J. Determination of Temperature Dependent Cooling Intensity for the Simulation of In-line Heat Treatment. In Conference proceedings of 22nd Conference on metallurgy and materials.1. 2013. p. 34 - 39. ISBN 978-80-87294-39-0.

HORSKÝ, J.; ONDROUŠKOVÁ, J.; MORAVEC, R.; BLAZEK, K.; YIN, H. Analysis of Directly Measured Heat Transfer Coefficients During Special Experiments to Provide Better Understanding of Secondary Cooling During Continuous Casting Process. In 2013 AISTech Conference Proceedings. Pittsburgh,, AISTech 2012. 2013. p. 1401 - 1408. ISBN 978-1-935117-32-2.

CHABIČOVSKÝ, M.; RAUDENSKÝ, M. Experimental Investigation of the Heat Transfer Coeficient. Materiali in tehnologije. 2013. 47(3). p. 395 - 398. ISSN 1580-2949. (IF(2012)=0,571).

SVĚRÁK, T.; SIKOROVÁ, K. Problems with the Continous Measurement of the Powdered Materials Moisture Content. International Congress on Particle Technology PARTEC 2013, Nurnberg, 23.-25.4.2013. Nurnberg, Nurmberg Messe GmbH. 2013. ISBN 978-3-00-040578-5.

RAUDENSKÝ, M.; HRABOVSKÝ, J.; JANČÍKOVÁ, Z. Intensification of spray cooling by presence of oxides. In Oceláři. Ostrava, Tanger spol. s.r.o. 2013. p. 113 - 117. ISBN 978-80-87294-37-6.

SVĚRÁK, T.; BAKER, C.; KOZDAS, O. Efficiency of grinding stabilizers in cement clinker processing. MINERALS ENGINEERING. 2013. 2013(43-44). p. 52 - 57. ISSN 0892-6875.

RAUDENSKÝ, M.; HORSKÝ, J.; ONDROUŠKOVÁ, J.; VERVAET, B. Measurement of Thermal Load on Working Rolls during Hot Rolling. Steel research international (Online). 2013. 84(3). p. 269 - 275. ISSN 1869-344X.

ONDROUŠKOVÁ, J.; POHANKA, M.; VERVAET, B. Heat-flux computation from measured-temperature histories during hot rolling. Materiali in tehnologije. 2013. 47(1). p. 85 - 87. ISSN 1580-2949.

SVĚRÁK, T.; ZUBEK, P.; FEKETE, R. Vliv sypných vlastností partikulárních materiálů na jemnosti materiálu. VII. konference s mezinárodrodnou účasťou Partikulárne látky vo vede, priemysle a životnom prostredí. Košice, Slovensko, TUKE Košice. 2012. p. 1 - 7. ISBN 978-80-553-1211-8.

ŠTEVULOVÁ, N.; EŠTOKOVÁ, A.; SVĚRÁK, T. Ground stock changes under the dry mode of the ultra-fine grinding conditions. Praha, ČSCHI. 2012. p. 1364 - 1364. ISBN 978-80-905035-1-9.

ASTROUSKI, I.; RAUDENSKÝ, M. Experimental studies of the polymeric hollow fiber heat exchangers exchangers. 20th jubilee conference on materials and technology. program and book of abstracts. Ljubljana, Institut za kovinske materiale in tehnologije. 2012. p. 35 - 35. ISBN 978-961-92518-5-0.

ZAHRADNÍK, R.; HRABOVSKÝ, J.; RAUDENSKÝ, M. Influence of the Rolling Loads on the Stress in the Roll Surface Layer. 20th jubilee conference on materials and technology. program and book of abstracts. Ljubljana, Institut za kovinske materiale in tehnologije. 2012. p. 133 - 133. ISBN 978-961-92518-5-0.

CHABIČOVSKÝ, M.; RAUDENSKÝ, M. Experimental investigation of the heat transfer coefficient. 20th jubilee conference on materials and technology. program and book of abstracts. Ljubljana, Institut za kovinske materiale in tehnologije. 2012. p. 49 - 49. ISBN 978-961-92518-5-0.

RAUDENSKÝ, M.; HORSKÝ, J.; KOTRBÁČEK, P. Full Scale Measurements of Cooling Intensity and Homogeneity. In Quenching Control and Distortion. Ohio, ASM International. 2012. p. 124 - 133. ISBN 978-1-61503-980-7.

RAUDENSKÝ, M.; HNÍZDIL, M.; KOTRBÁČEK, P. Why oxides intensify spray cooling. The 30th International Steel Industry Conference. Paris. 2012. p. 92 - 337.

POHANKA, M.; KOTRBÁČEK, P. Design of cooling units for heat treatment. In Heat treatment conventional and applications. Rijeka, Croatia, InTech. 2012. p. 1 - 20. ISBN 978-953-51-0768-2.

ZAHRADNÍK, R. The Simulation of the Influence of Water Remnants on a Hot Rolled Plate After Cooling. Acta Polytechnica. 2012. 52(4). p. 118 - 120. ISSN\~1210-2709.

HORSKÝ, J.; RAUDENSKÝ, M.; LUKS, T. Thermal Load and Fatigue of Rolls in Hot Rolling. 2012 AISTech Conference Proceedings. Atlanta (GA, U.S.A.), AISTech 2012. 2012. p. 2149 - 2157. ISBN 978-1-935117-23-0.

HORSKÝ, J.; KOTRBÁČEK, P.; KVAPIL, J.; SCHOERKHUBER, K. Optimization of working roll cooling in hot rolling. 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics. Malta, HEFAT. 2012. p. 685 - 690. ISBN 978-1-86854-986-3.

BELLEROVÁ, H.; TSENG, A.; POHANKA, M.; RAUDENSKÝ, M. Spray cooling by solid jet nozzles using alumina/water nanofluids. International Journal of Thermal Sciences. 2012. 62(12). p. 127 - 138. ISSN 1290-0729. (IF(2011)=2,142).

BELLEROVÁ, H.; TSENG, A.; POHANKA, M.; RAUDENSKÝ, M. Heat transfer of spray cooling using alumina/water nanofluids with full cone nozzles. Heat and Mass Transfer. 2012. 48(11). p. 1971 - 1983. ISSN 0947-7411. (IF(2011)=0,896).

WEISZ-PATRAULT, D.; LEGRAND, N.; LABBE, N.; HORSKÝ, J.; LUKS, T.; EHRLACHER, A. Experimental Study of Interfacial Heat Flux and Surface Temperature by Inverse Analysis with Thermocouples (fuly embedded) during Hot Steel Strip Rolling. Advanced Materials Research, 2012, vol. 452- 453, no. 3, p. 959-963. ISSN: 1022- 6680.

LEGRAND, N.; LABBE, N.; WEISZ-PATRAULT, D.; EHRLACHER, A.; LUKS, T.; HORSKÝ, J. Analysis of roll gap heat transfers in hot steel strip rolling through roll temperature sensors and heat transfer models. Key Engineering Materials, 2012, vol. 2012, no. 504- 506, p. 1043-1048. ISSN: 1013- 9826.

RAUDENSKÝ, M.; VESELÝ, T.; DOHNAL, M. Low Cost Membrane Contactors Based on Hollow Fibres. In EPJ Web of Conferences. Francie: EDP Sciences, 2012. p. 01009-p. 1 (01009-p.10 p.) ISSN: 2100- 014X.

ZAHRADNÍK, R.; KOTRBÁČEK, P.; BOHÁČEK, J. Experimental investigation of heat transfer between hot air nozzle flow and cylinder. EPJ Web of Conferences, 2012, vol. 25 (2012), no. 4, p. 01102-p. 1 (01102-p.6 p.) ISSN: 2100- 014X.

LUKS, T.; ONDROUŠKOVÁ, J.; HORSKÝ, J. Nozzle cooling of hot surfaces with various orientations. EPJ Web of Conferences, 2012, vol. 25 (2012), no. 4, p. 01063-p. 1 (01063-p.10 p.) ISSN: 2100- 014X.

KVAPIL, J.; HRABOVSKÝ, J.; POHANKA, M. Water chamber geometry and stabilizer construction effect on water pressure distribution of high pressure descaling nozzles. EPJ Web of Conferences, 2012, vol. 25 (2012), no. 4, p. 01076-p. 1 (01076-P.11 p.) ISSN: 2100- 014X.

ASTROUSKI, I.; RAUDENSKÝ, M. The study of polymeric hollow fiber heat exchangers. In engineering mechanics 2012. 1. Svratka: 2012. p. 47-57. ISBN: 978-80-86246-40-06.

CHABIČOVSKÝ, M.; RAUDENSKÝ, M.; HNÍZDIL, M. Influence of water temperature on heat transfer coefficient in spray cooling of steel surfaces. In engineering mechanics 2012. Engineering mechanics. J. Náprstek, c. Fischer, 2012. p. 499-505. ISBN: 978-80-86246-40-6.

HNÍZDIL, M.; RAUDENSKÝ, M. Influence of Water Temperature on the Cooling Intensity during Continuous Casting and Hot Rolling. In Conf. proceeding METAL 2012. 1st Edition 2012. 2012. p. 1-6. ISBN: 978-80-87294-29- 1.

HRABOVSKÝ, J.; HORSKÝ, J. Influence of the water chamber and position of the stabilizer on the impact pressure at high pressure descaling. In conf. Porc. Metal 2012. 1st edition 2012. 2012 tanger ltd. Ostrava, 2012. p. 1-6. ISBN: 978-80-87294-29-1.

RAUDENSKÝ, M.; HNÍZDIL, M.; HWANG, J.; LEE, S.; KIM, S. Influence of water temperature on cooling intensity of mist nozzles in continuous casting. Materiali in tehnologije, 2012, vol. 46, no. 3, p. 311-315. ISSN: 1580-2949. (IF(2011)=0,804)

ZAHRADNÍK, R. Impact of Water Remains on a Hot Rolled Plate After Cooling. MM Science Journal, 2012, vol. 2012, no. 7, p. 1-2. ISSN: 1805-0646.

WEISZ-PATRAULT, D.; LEGRAND, N.; LABBE, N.; HORSKÝ, J.; LUKS, T.; EHRLACHER, A. Experimental Study of Interfacial Heat Flux and Surface Temperature by Inverse Analysis with Thermocouples (fully embedded) during Hot Steel Strip Rolling. Advanced Materials Research. 2012. 452-453(3). p. 959 - 962. ISSN\~1022-6680.

RAUDENSKÝ, M.; HNÍZDIL, M.; LEE, S.; KIM, S.; HWANG, J. Influence of Water Temperature on Cooling Intensity of Mist Nozzles in Continuous Casting. In 19th Conference on Materials and Technology, Ljubljana 2011. 2011. p. 60 - 69. ISBN 978-961-92518-4-3.

KVAPIL, J.; HRABOVSKÝ, J.; POHANKA, M. Water chamber geometry and stabilizer construction effect on water pressure distribution of high pressure descaling nozzles. In Experimental Fluid Mechanics 2011, Proceedings of the International conference. Jièín. 2011. p. 394 - 404. ISBN 978-80-7372-784-0.

LUKS, T.; ONDROUŠKOVÁ, J.; HORSKÝ, J. Nozzle cooling of hot surfaces with various orientations. In Experimental fluid Mechanics 2011. Proceedings of the International conference. Jièín. 2011. p. 337 - 346. ISBN 978-80-7372-784-0.

ZAHRADNÍK, R.; KOTRBÁČEK, P.; BOHÁČEK, J. Experimental investigation of heat transfer between hot air nozzle flow and cylinder. In Experimental fluid Mechanics 2011. Proceedings of the International conference. Jièín. 2011. p. 1059 - 1064. ISBN 978-80-7372-784-0.

RAUDENSKÝ, M.; VESELÝ, T.; DOHNAL, M. Low Cost Membrane Contactors Based on Hollow Fibres. In Experimental Fluid Mechanics 2011. Jièín. 2011. p. 590 - 599. ISBN 978-80-7372-784-0.

HORSKÝ, J.; RAUDENSKÝ, M.; KVAPIL, J. Controlled Cooling Simulation of Steel Strips. In Steel Strip 2011. 2011. p. 163 - 170. ISBN 978-80-260-0539-1.

HORSKÝ, J.; RAUDENSKÝ, M. EXPERIMENTAL STUDY OF HEAT TRANSFER FOR COOLING IN METALLURGY. In Tepelná technika v teorii a praxi. 2011. p. 57 - 68. ISBN 978-80-248-2463-5.

HORÁK, A.; RAUDENSKÝ, M.; POHANKA, M.; BELLEROVÁ, H.; REICHARDT, T. Research on cooling efficiences of water, emulsions and oil. Engineering Mechanics. 2011. 18(2). p. 81 - 88. ISSN\~1802-1484.

MORAVEC, R.; HORSKÝ, J.; BLAZEK, K.; GRAHAM, C.; FIEGLE, S.; DOMBOVIC, T.; KAURICH, T. Coupling of Solidification Model and Heat Transfer Coefficient to Have Valuable Tool for Slab Surface Temperature Prediction. In METEC 7th InSteelCon 2011. 2011. p. 1 - 95.

ZAHRADNÍK, R. Vliv přítomnosti termočlánku na okrajové podmínky přenosu tepla ocelových povrchů. In Power system engineering, thermodynamics & fluid flow. Plzeò, 2011. p. 250 - 257. ISBN 978-80-261-0004-1.

ONDROUŠKOVÁ, J.; POHANKA, M. Nonhomogeneous cooling effect on metallurgical structure of material. In Power System Engineering, Thermodynamics & Fluid Flow. 2011. p. 10 - 15. ISBN 978-80-261-0004-1.

GALLIK, R.; RAUDENSKÝ, M.; DOHNAL, M.; HORSKÝ, J. BIOFOULING OF FLEXIBLE PLASTIC HEAT EXCHANGERS - FUZZY EXPERT SYSTEM. Heat Exchanger Fouling and Cleaning - 2011. ICHMT. 2011. p. 1 - 9.

DOHNAL, M.; POLLMANN, K.; KUTSCHKE, S.; GUENTHER, T.; HORSKÝ, J.; RAUDENSKÝ, M. FEASIBLE DE FOULING METHODS OF FLEXIBLE PLASTIC HEAT EXCHANGERS. In Conference Proceeding Heat Exchangers Fouling and Cleaning - 201. 2011. p. 1 - 5.

BELLEROVÁ, H.; POHANKA, M. Spray cooling by multi-walled carbon nanotubes and Fe nanoparticles. In Computational Methods And Experimental Measurements XV. UK, Witt Press. 2011. p. 293 - 303. ISBN 978-1-84564-540-3.

HNÍZDIL, M.; RAUDENSKÝ, M. Descaling by Pulsating Water Jet. In Thompson and Reuters. Tanger spol. s r.o. 2011. p. 43 - 48. ISBN 978-80-87294-17-8.

RAUDENSKÝ, M.; HNÍZDIL, M.; HORSKÝ, J.; MARMONIER, F. Cooling System for Continuous Galvanizing Line. In Proceedings of Metal 2011. Tanger spol. s.r.o. 2011. p. 1 - 6. ISBN 978-80-87294-22-2.

VAVREČKA, L.; HRABOVSKÝ, J.; HORSKÝ, J. Experimentální výzkum a numerická simulace procesu hydraulického odstraòování okují. Hutnické listy. 2011. LXIV(2). p. 4 - 11. ISSN 0018-8069.

Legrand N., Borean J.L., Cuel-Oller A., Munz J.,Uijtdebroek H.,Montmitonnet P.,Bouache T., Perez J., Horsky J., New Cooling Techniques to Enhance Roll Bite Lubrication, Lower Water Usage and Decrease Energy Consumption on Cold Strip Mills, In Proc. 10th International Steel Rolling Conference, 2010, pp. 1-11, Beijing, China

Hnizdil, M., Raudensky, M., Horsky, J., Kotrbacek P., Pohanka M., In-Line Heat Treatment and Hot Rolling, In Proc. AMPT 2010, October 24 -27, 2010, Paris, France

Horak A., Raudensky, M., Pohanka M., Bellerova H., Reichardt T., Research on Cooling Efficiencies of Water, Emulsions, and Oil, Journal of Metallurgical and Mining Industry, 2010, Vol. 2, No.4, ISSN 2076-0507

Bohacek J., Horak A., Numerical Study of Droplet Dynamics Impinging onto Steel Plate Covered with Scale Layer, Frontiers of Mechanical , Dec. 2010, Vol 5, No 4, pp.389-398, ISSN 1673-3479

Raudensky M., Horsky, J., Hajduk D., Cecho L., Interstand Cooling – Design, Control and Experience , Journal of Metallurgical and Mining Industry, 2010, Vol.2, No.3, ISSN 2075-0507

Bellerova H., Pohanka M., Raudensky M., Tseng A.A., Spray cooling by water based nanofluids with Al2O3 and TiO2, In Proc. ITHERM2010, June 2-5,2010, Las Vegas, USA, ISBN 978-1-4244-5343-6, ISSN 1087-9870

Hrabovsky, J.; Horsky, J., Numerical Simulation of the High Pressure Hydraulic Descaling, In Proc. Metal 2010, May 2010, ISBN 978-80-87294-15-4

Hnizdil, M.; Raudensky, M., Descaling by Pulsating Water Jet , In Proc. Metal 2010, May 2010, ISBN 978-80-87294-15-4

Slabakova, J.; Pohanka, M., Cooling efficiency of flat jet nozzles versus full cone nozzles on working roll, In Proc. Engineering Mechanics 2010, 10.-13. May 2010, ISBN 978-80-87012-26-0

Kvapil, J.; Pohanka, M., Water impact measurement of two overlapping high pressure flat jet nozzles using two different methods, In Proc. Engineering Mechanics 2010, 10.-13. May 2010, ISBN 978-80-87012-26-0

Pohanka M., Bellerova H., Raudensky M., Experimental Technique for Heat Transfer Measurements on Fast moving Sprayed Surfaces , Journal of ASTM International, Vol.6, No.4, 2009.

Bohacek J., Modelling of a Free-Falling Water Droplet, Handicap of CSF Approach and Its Improvement Design , In Proc. Water Jet 2009, 4-5 Nov.2009, ISBN 978-80-86407-81-4

Van Steden H., Bohacek J., Kotrbacek P., Raudensky M., Intensification of Roll Cooling in Hot Rolling with a Roll Wiper , Research Disclosure Journal, Oct.2009, ISSN 0374-4353.

Kotrbacek P., Pohanka M., HorskY J., Raudensky M., Modelling of Cooling and Thermal Load of Rolls in Hot Rolling , in the 3 rd S teelsim Conf., 8-9 Sept.2009, Leoben, Austria.

Raudensky M., Horsky J, Hajduk D., Cecho L., I nterstand Cooling – Design, Control and Experience , In the 5 th European Rolling Conference, 23-25 June 2009, London, UK

Raudensky M., Bohacek J., Leidenfrost Phenomena at Hot Sprayed Surface, In the 7 th ECI International Conference on Boiling Heat Transfer Boiling 2009, 3-7 May 2009, Florianopolis, Brazil.

Kotrbáček P., Horský J., Boháček J., Válek L., Zajíček I., Modification of Billet Continuous Casting Machine from Square to Round Geometry, In the 6 th European Conference on Continuous Casting 2008, Riccione, Italy, June 3-6, 2008, ISBN 88-85298-65- 6.

Pohanka M., Horský J., Inverse Algorithms for Time Dependent Boundary Reconstruction of Multidimensional Heat Conduction Model, In the seminar of Thermophysics 2007, Koèovce, Slovakia, October 11-12, 2007, ISBN 978-80-227-2746-4.

Raudenský M., Hydraulic Descaling and Roll Cooling , Conference of POSCO, Pohang, Korea , August 30.-31., 2007.

Horský J., Raudenský M., Vavrečka L., Experimental Study of Hydraulic Descaling,, In 5 th International Conference HEFAT 2007, Sun City, South Africa, July 1-4, 2007, ISBN: 978-86854-6435.

Pohanka M., Horský J., Juriga J., Petruška J., Optimization of Calibrated Shaped Rolls , In 16 th Metalurgical and Materials Conference METAL 2007, Hradec n/Moravicí, Czech Republic, May 22-24, 2007.

Pohanka M., Limitation of Thermal Inverse Algorithm and Boundary Conditions Reconstruction for Very Fast Changes on Boundary, In IM 2007, Svratka , Czech Republic , May 14-17, 2007, ISBN 978-80-87012-06-2.

Boháček J., Hnízdil M., Image Analysis of Water Jet, In IM 2007, Svratka , Czech Republic , May 14-17, 2007, ISBN 978-80-87012-06-2.

Horák A., Bellerová H., Influence of Coolant Type on Cooling Spray Intensity , In IM 2007, Svratka , Czech Republic , May 14-17, 2007, ISBN 978-80-87012-06-2.

Horák A., Boháček J., High – Speed Droplet Impact During Hydraulic Descaling Process, In IM 2007, Svratka, Czech Republic, May 14-17, 2007, ISBN 978-80-87012-06-2.

Raudenský M., Horský J., Pohanka M., Kotrbáček P., Cooling of Rolls in Hot Rolling of Long Products , In Rolls 4 2007, Birmingham , UK , March 14-16, 2007.

Raudenský M., Horák A., Horský J., Pohanka M., Kotrbáček P., Hydraulic Descaling Improvement, Findings of Jet Structure on Water Hammer Effect. La Revue de Métallurgie , February 2007, ISSN 0035-1563(print edition), ISSN 1156-3141.

Raudenský M., Horák A., Horský J., Pohanka M., Kotrbáček P., Hydraulic Descaling Improvement, Findings of Jet Structure on Water Hammer Effect, In Journees Siderurgiques Internationales, December 14-15, 2007.

Raudenský M., Horák A., Horský J., Pohanka M., Kotrbáček P., Hydraulic Descaling Improvement – Findings of jet Structure on Water Hammer Effect, La Revue de Mettallurgie – ATS – JSI, Paris 14 – 15 December 2006, pp. 34-35.

Boháček J., Ejector Type Cooling Nozzle , In Experimental Fluid Mechanics 2006, December 6-7, 2006, Liberec, Èeská republika, ISBN 80-7372-141-4.

Tseng A.A., PArk J., Vakanas G.P., Wu H., Raudenský M., Chen T.P., Influence of Interface Oxidation on Transmission Laser Bonding of Wafers for Microsystem Packaging , Microsystem Technologies, Vol. 13, No. 1 January 2007, 49-59, ISSN 0946-7076.

Horsky J., Raudensky M., Vavrečka L., Experimental Study of Heat Transfer in Hot Rolling , In 16 th Rolling Conference, Buenos Aires, Argentina, November 6-9, 2006.

Hajduk D., Horský J., Raudenský M., Control of ISC on Hot Strip Mill , In 7 th International Conference Steel Strip 2006, Přerov, October 4-6, 2006, ISBN 80-239-7750-4.

Raudenský M., Horský J., Kotrbáček P., Spray Cooling of Rotating Roll , In 13 th International Heat Transfer Conference, Sydney, August 13-18, 2006, ISBN 1-56700-226-9.

Raudenský M., Horský J., Kotrbacek P., Intensification and Control of Roll Cooling. In Steel Rolling 2006. Paris , June 19-21, 2006.

Pohanka, M. Estimation of discretization error in time and space domain of numerical heat conduction . In Engineering mechanics 2006. Svratka (Czech Republic), 2006, pp. 288 – 289. ISBN 80-86246-27-2.

Morávka, J. & Kuběna, J. & Raudenský, M. aj. 2006. Závislost Leidenfrostovy teploty a HTC na parametrech ostřiku u vodních trysek. In Sborník přednášek 15. mezinárodní konference metalurgie a materiálů METAL 2006. Ostrava : Tanger, 23.-25.5.2006, referát č.86, 8 s. ISBN 80-86840-18-2.

Morávka, J. & Kuběna, J. & Horský, J. aj. 2006. Vliv ostřikových parametrů na Leidenfrostovou teplotu a intenzitu přenosu tepla v úseku sekundárního chlazení ZPO. In Sborník přednášek 22. celostátní konference se zahraniční účastí Teorie a praxe výroby a zpracování oceli, Rožnov pod Radhoštěm. Ostrava : Tanger a MARQ, 4.-5.4.2006, s. 133-139. ISBN 80-86840-15-8.

Horský, J., Raudenský, M., Kotrbáček, P.,and Tseng A. A.: Indentation and Piercing of Steel in a Mushy State , ASM International, Journal of Materials Engineering and Performance, Vol. 14, No. 5, 2005, p. 549-615, ISSN 1059-9495.

Kotrbáček, P., Horský, J., Raudenský, M., Pohanka, M.: Experimental Study of Heat Transfer in Hot Rolling , Revue de Metallurgie, 4 e trimestre 2005, p. 42-43, ISBN 2-911212- 05-3.

Kotrbáček P., Horský J., Vavrečka L.: Optimalizace chlazení hutních válců – výpočtová a experimentální analýza teplotní napjatosti ve tvarových válcích , Kalibrace válců 2005, prac. seminář, 15.- 16. června 2005, Čeladná.

Horák A., Střítecký P.: Influence of Surface Roughness on Spray Cooling Intensity in High Temperature Applications , Engineering Mechanics 2005, May 9-12, 2005, Svratka, Czech Republic, ISBN.80-85918-93-5.

Vavrečka L., Petruška J., Horský J.: Computational and Experimental Analysis of Thermal Stresses in Grooved Roll, Engineering Mechanics 2005, May 9-12, 2005, Svratka, Czech Republic, ISBN.80-85918-93-5.

Kotrbáček P., Horský J., Raudenský M.: Experimental Study of Semi-Solid Steel Deformation , 4 th International Conference Therm Tech Form 2005, ( Tale, Slovak Republic , September 5-8, 2005 ). Košice: Acta Metallurgica Slovaca, 2/2005, 11, p. 334- 339, ISSN 1355-1532.

Raudenský,M. – Horský. J.: Cooling in Hot Rolling, 4 th International Conference Therm Tech Form 2005, (Tale, Slovak Republic , September 5-8, 2005 ). Košice: Acta Metallurgica Slovaca, 2/2005, 11, p. 301-308, ISSN 1355-1532.

Raudenský, M. – Horák, A. – Kotrbáček, P.: Optimisation Of Controlled Cooling in Continuous Casting , 1 st International Conference on Simulation and Modelling of Metalurgical Processes in Steelmaking, 25 - 27 October 2005, Brno, Czech Republic,

Horský, J. – Vavrečka, L. – Pohanka, M.: Simulation Of Thermal Behaviour Of Rolls In Rolling , 1 st International Conference on Simulation and Modelling of Metalurgical Processes in Steelmaking, 25 - 27 October 2005, Brno , Czech Republic

Horský, J., Raudenský, M., Tseng A.A.: Heat Transfer Study of secondary cooling in Continuous Casting, AISTech 2005, Iron & Steel technology Conference and exposition, May 9-12, 2005, Charlotte, USA.

Horský, J. – Raudenský, M.: Measurement of Heat Transfer Characteristics of Secondary Cooling in Continuous Casting, 14 th International Metallurgical & Materials Conference, Metal 2005 May 24-26, 2005, Hradec n/Moravicí, CR, ISBN 80-86840-13-1.

Horský,J., Kotrbáček,P., Petruška,J., Řídký,R.: Experimental Study of Semi-Solid Steel Deformation. International Journal of Forming Processes, Vol. 8- No. 1/2005, p. 63 – 75, ISSN 1292-7775, ISBN 2-7462-1163-7, Lavoisier, 2005.

Raudenský,M. – Horský. J.: Secondary Cooling in Continuous Casting and Leidenfrost Temperature , Ironmaking and Steelmaking Vol 32, No. 2 (2005), DOI 10.1179/174328105X15913, Maney, UK.

Horský, J. – Raudenský, M.- Pohanka, M.: Experimental Study of Heat Transfer in Hot Rolling and Continuous Casting, Materials Science Forum Vols. 473-474 (2005), Materials Science, Testing and Informatics II, ISSN 0255-5476, ISBN0-87849-957-1, Trans Tech Publications, Switzerland.

Zmudzki, A. – Pietrzyk, –M. Kotrbáček, P. – Horský, J.: Various Plastometric Tests for Semi Solid Materials and Their Numerical Simulations , 10 th International Conference Metal Forming 2004, September 19-22, 2004, Krakow, Poland, ISBN 3-937057-08-0, ISSN 1619-9529.

Kotrbáček, P. – Horský, J. – Raudenský, M.- Pohanka, M.: Influence of Parameters of Hydraulic Descaling on Temperature Losses and Surface Quality of Rolled Material , 10 th International Conference Metal Forming 2004, September 19-22, 2004, Krakow, Poland, ISBN 3-937057-08-0, ISSN 1619-9529.

Raudenský, M. – Horský, J. – Kotrbáček, P.: Controlled Cooling in Continuous Casting , 3 rd International Conference on Continuous Casting of Steel in developing Countries CCC`04, September 14-17, 2004, Beijing, China, ISSN 0449-749X, CN11-2118/TF.

Horský, J. – Raudenský, M. – Tseng. A. A.: Intensification of Roll Cooling Using a Two- level Pressure System , AISTech 2004 – Iron and Steel Conference and Exposition, September 15/17, 2004, Nashville, USA, ISBN 1-886362-76-9, ISSN 1551-6997.

PUBLICATIONS
>>>
HOME
>>>
RESEARCH
>>>
CONTACT

 

>>>
PEOPLE
>>>
NEWS